CMT 191.008.11 1/4-Inch Diameter, 1-Inch Cut, 1/4-Inch Shank Upcut Spiral Router Bit

CMT 191.008.11 1/4-Inch Diameter, 1-Inch Cut, 1/4-Inch Shank Upcut Spiral Router Bit Review

CMT 191.008.11 1/4-Inch Diameter, 1-Inch Cut, 1/4-Inch Shank Upcut Spiral Router Bit Feature

• Cut Diameter: 1/4"
• Cut Length: 1"
• Shank Diameter: 1/4"
• Overall Length: 2 1/2"

Spiral bits are unsurpassed for cleaner cuts in ordinary or difficult materials, softwood, hardwood, plywood, composites, etc. Due to their spiral cutting edge which stays in continuous contact with the workpiece, these bits give a smooth, chatter-free cutting action, unlike conventional bits which have intermittent contact with the workpiece. Ground from the finest micrograin carbide stock, CMT's spiral bits feature the latest in bit geometry.

Freud 50-118 Top Bearing Flush Trim Router Bit, 3/4-Inch Diameter by 1-3/4-Inch Carbide Cutting Length 1/2-Inch Shank

Freud 50-118 Top Bearing Flush Trim Router Bit, 3/4-Inch Diameter by 1-3/4-Inch Carbide Cutting Length 1/2-Inch Shank Review

Freud 50-118 Top Bearing Flush Trim Router Bit, 3/4-Inch Diameter by 1-3/4-Inch Carbide Cutting Length 1/2-Inch Shank Feature

• 3/4-Inch diameter, 1-3/4-Inch carbide cutting length, 1/2-Inch shank
• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Non-stick Perma-Shield Coating that reduces gumming, rusting, and corrosion for longer life with less wear
• Cuts all composition materials, plywoods, hardwoods, and softwoods
• Freud's Limited Lifetime Guarantee

Use for template work and lettering. The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. No. 50-116: 3/4" overall diameter x 3/4" bearing diameter x 1" carbide height x 1/2" shank diameter x 2-13/16" overall length No. 50-118: 3/4" overall diameter x 3/4" bearing diameter x 1-3/4" carbide height x 1/2" shank diameter x 3-1/2" overall length

Freud 99-761 Ogee Profile New Premier Adjustable Rail and Stile System, 1/2-Inch shank

Freud 99-761 Ogee Profile New Premier Adjustable Rail and Stile System, 1/2-Inch shank Review

Freud 99-761 Ogee Profile New Premier Adjustable Rail and Stile System, 1/2-Inch shank Feature

• Imagine two router bits that create any door in 5/8 inch to 1-1/4 inch door thickness range, create "rattle free" flat panel doors, create any length long tenon construction and more
• Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 5.5mm to 6.35mm ); The unique cutter geometry virtually eliminates tearout
• Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints
• Bits feature Freud's Perma-Shield coating that reduces heat and pitch build up along with rust, and Freud's TiCo Hi-Density Carbide to maximize bit life and material finish
• Optional cutters are available for double profile doors (99-861) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it's the same set of router bits

Mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks.

Freud 99-450 2-1/2-Inch Diameter Table Edge and Hand Rail Router Bit

Freud 99-450 2-1/2-Inch Diameter Table Edge and Hand Rail Router Bit Review

Freud 99-450 2-1/2-Inch Diameter Table Edge and Hand Rail Router Bit Feature

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Designed for the serious woodworker, the Freud 99-450 Quadra-Cut - 2-1/2 Inch Dia. Table Edge and Hand Rail Router Bit - 1/2-Inch Shank features a non-stick Perma-Shield coating and Freud's patented Quadra-Cut design for a smoother finish that requires no rework. Quadra-Cut employs four cutting blades, rather than the industry standard of two, letting you create professional-quality table edges and decorative handrails on a variety of stock, including composition materials, plywood, hardwood, and softwood. Because it's constructed with Freud's exclusive TiCo Hi-Density Carbide MicroGrain material, this durable router bit is designed to last.

Quadra-Cut delivers quick, clean results.View larger.

This router bit creates decorative table edges and handrails.

Different setups let you achieve multiple profiles.View larger.

Quadra-Cut Design for a Consistently Clean Finish
The exclusive Quadra-Cut design uses four cutters for a flawless finish. This innovative cutter design works by utilizing two of the cutters for an upward cutting action, while the other two cutters simultaneously cut downward. The result is an amazingly smooth finish that requires no rework.

Produce Attractive Table Edges and Sturdy Handrails
Use the 99-450 Table Edge and Handrail Bit with any handheld or table-mounted portable router that accepts a 1/2-inch shank for that perfect finishing touch on wooden tables, plaques, and handrails. This bit produces a beautiful two-radius design with a large radius of 3/8 inches and a small radius of 15/64 inches for a unique, custom look.

Create attractive, sturdy handrails for staircases or ramps with ease. Plus, you can use the 99-450 Bit in combination with another handrail profile bit to produce totally customized designs.

Durable Design with Protective Coating to Resist Heat and Corrosion
Freud equips all of their router bits with their exclusive TiCo Hi-Density MicroGrain carbide for maximum durability and cutting life. In addition, Freud shields their bits from heat, rust, corrosion and wear by coating all of their Quadra-Cut Router Bits with their exclusive non-stick, red Perma-SHIELD coating.

The 99-450 Table Edge and Handrail Bit measures 2-3/4 inches long and has a 1/2-inch shank and a 2-1/2-inch overall diameter. Freud cutting tools are backed by the Freud Limited Lifetime Cutting Tool Warranty to ensure customer satisfaction with every purchase.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. For more information, visit www.freudtools.com or contact customer service at phone: 800-472-7307.

What's in the Box
Freud 99-450 Quadra-Cut - 2-1/2 Inch Dia. Table Edge and Hand Rail Router Bit - 1/2-Inch Shank
An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Revolutionary Quadra-Cut design employs four cutting edges vs. two, for a flawless finish that requires no sanding or rework. Two carbide cutters have an up-shear angle to remove most of the stock while the second pair of down-shear cutters makes a final cut to produce an ultra clean edge. Use this bit to produce sturdy, attractive handrails for staircases. Bits may be combined with another rail profile to create a custom railing design.

CMT 800.505.11 13-Piece 1/2-Inch Shank Router Bit Set

CMT 800.505.11 13-Piece 1/2-Inch Shank Router Bit Set Review

Get any shop up and running in a hurry with this set, or supplement your existing bit collection. It includes thirteen 1/2" shank bits that every craftsman needs: ogee, cove, rabbeting, roundover, dovetail, chamfer, straight and flush trim. Packed in a beautiful Italian hardwood case for display and safe storage.

Makita 733123-4A Router Bit 1/4-Inch Roman Ogee, 2 Cutting Flutes,1/4-Inch Shank Carbide Tip

Makita 733123-4A Router Bit 1/4-Inch Roman Ogee, 2 Cutting Flutes,1/4-Inch Shank Carbide Tip Review

Makita 733123-4A Router Bit 1/4-Inch Roman Ogee, 2 Cutting Flutes,1/4-Inch Shank Carbide Tip Feature

• The replacement bearing is part number 733132-2A
• Overall length is 2 1/4 inch

The Makita 733123-4A is a 1/4-Inch Roman Ogee 2 Flute Carbide Tipped Router Bit for decorative molding or edging and is popular for furniture and cabinet work. Features: Carbide Tipped for added strength and durability What's In The Box: Makita 733123-4A 1/4-inch Roman Ogee 2 Flute Carbide Tipped Router Bit

Freud 93-200 6 Piece Architectural Molding Router Bit Set

Freud 93-200 6 Piece Architectural Molding Router Bit Set Review

Freud 93-200 6 Piece Architectural Molding Router Bit Set Feature

• 99-414 and 99-417 upper and lower profile Crown Molding Bits, 99-477 and 99-478 Chair Rail Bits upper and lower industry standard #300 profile, 99-466 Casing Bits industry standard #366 profile, and 99-480 Base Cap Bits industry standard #163 profile.
• Features Freud's TiCo� Hi-Density Carbide with Titanium for long life and a flawless finish
• Perma-shield coating reduces friction and heat build-up, helps prevent the adhesion of resins, and protects the bit from corrosion
• Use only with 1/2 inch shank table-mounted routers or CNC equipment. Note: For best results make two or more passes.
• Freud's Limited Lifetime Guarantee

Application: Add elegant detail to any room of the home with the most popular molding profiles. Includes bits to decorate the wall from top to bottom! Set of six 1/2" shank bits mill beautiful Crown, Casing, Chair Rail and Base Molding. Add beautiful, traditional molding to ceilings, doors, windows, built-ins and many other projects. Use with hardwoods or softwoods to mill stain grade molding. Also routs composition materials. Use only with 1/2" shank table-mounted, CNC or automatic routers.

Dremel 692 6-Piece Router Bit Set

Dremel 692 6-Piece Router Bit Set Review

Dremel 692 6-Piece Router Bit Set Feature

• Rout, edge, inlay, and mortise in wood
• Constructed of high-speed steel
• Reusable plastic storage case included
• Ideal for a wide range of hobby, repair, and renovation jobs
• Do not run in excess of 30,000 RPM

A valuable addition to any woodworker's Dremel rotary tool, the Dremel 692 6-Piece Router Bit Set includes six high-speed router bits made from high-grade steel. Conveniently packaged in a reusable plastic case, these bits are ideal for routing, inlaying, and mortising wood and other soft materials. Ideal for a wide range of light to medium hobby, repair, and renovation jobs, this set ensures that you have the exact bit you need to tackle your next project.

The Dremel 692 6-Piece Router Bit Set includes: 612 piloted beading router bit 615 corner rounding router bit 650 1/8-inch straight router bit 654 1/4-inch straight router bit 617 core box router bit 618 chamfer router bit

For hobby, repair, and renovation jobs, the versatile bits can route, inlay, and more.

High-Speed, Durable Steel Construction to Tackle a Range of Jobs
Made of high-speed, durable steel, these bits are the ideal size for rotary tools. The straight bits offer exceptional versatility, and the piloted edge bits help you add a personalized, detailed touch to wood frames, molding, and more.

All six router bits are forged from high-grade steel and packaged in a reusable plastic case.View larger.

Quality Construction for Precise Cuts the First Time
Designed for use with the 335 Plunge Router and 231 Shaper/Router attachments, these bits feature high-quality construction that allows you to make exceptionally precise cuts the first time, saving you energy and stress. They're also well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes.

User-Friendly Design and Easy Insertion Process for Longer Life
Incredibly easy to use, these bits work best when inserted all the way into the tool and then backed out slightly before tightening down. This insertion process provides plenty of shank for the collet or chuck to hold the bit in place. For optimum precision and longer life, it's also important to secure objects to a stable surface while working--if chattering occurs, simply increase the speed. It is also important to keep a light touch so the speed of the tool, not the strength of your arm, does the work.

Variety of Bits for a Range of Projects
This set comes with a total of six bits, including a 3/32-inch piloted beading bit, 1/4-inch core box bit, and 1/2-inch chamfer bit that all work well for inlaying and mortising wood and other soft materials.

About Dremel: A History of Brilliance and Innovation
Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.

What's in the Box
One 612 piloted beading router bit, one 615 corner rounding router bit, one 650 1/8-inch straight router bit, one 654 1/4-inch straight router bit, one 617 core box router bit, and one 618 chamfer router bit

CMT 851.502.11B Bowl & Tray Router Bit 1/2-Inch Shank, 1-1/4-Inch Cutting Diameter, 5/8-Inch Cutting Length With Bearing

CMT 851.502.11B Bowl & Tray Router Bit 1/2-Inch Shank, 1-1/4-Inch Cutting Diameter, 5/8-Inch Cutting Length With Bearing Review

CMT 851.502.11B Bowl & Tray Router Bit 1/2-Inch Shank, 1-1/4-Inch Cutting Diameter, 5/8-Inch Cutting Length With Bearing Feature

• Cut Diameter : 1 1/4"
• Cut Length : 5/8"
• Shank Diameter : 1/2"
• Cut Radius : 1/4"

The CMT Bowl and Tray Bit is ideal for making bowls, trays, boxes, cutting boards and many other specialty or craft items. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. For best results on jobs where accuracy is a priority we recommend using our top bearing bowl and tray bits shown at bottom of page. Bowl and Tray bits with top bearings are great for pattern work. Use them to create raised sign lettering, trays, and many other items.

MLCS 8375 Straight Router Bit 5-Piece Boxed Set

MLCS 8375 Straight Router Bit 5-Piece Boxed Set Review

MLCS 8375 Straight Router Bit 5-Piece Boxed Set Feature

• Perfect for tricky cross-grain cuts
• Small and narrow cuts are no problem
• Dual 500 pound hold down clamps add strength and rigidity
• Keeps fingers safely away from dangerous, sharp blades
• Easy-to-use

Boxed Set includes 5 quality Carbide-tipped router bits in sizes 1/4", 3/8", 1/2", 5/8", and 3/4". All Bits are 1/2" shank.

35 Piece Router Bit Set

35 Piece Router Bit Set Review

You'd pay hundreds if you purchased these router bits separately. Order now and save! A dream buy for wood workers...35 high-quality router bits for just {ItemOverviews}.86 each! This incredible set from Eastern Steel has a huge assortment of bits that let you V-groove, flush trim, chamfer, dovetail and much more with professional results every time. Bits have 1/4 shank and are solid carbide or carbide tipped for years of dependable use and clean cuts with a working error of less than 0.2 mm. Bits come in 11 x 9 x 2-1/2 wooden storage case with labels to keep them clean and organized.

MLCS 7733 60-Degree Woodworking Edge Banding Tongue and Groove Set, 1/2-Inch Shank, 2-Piece

MLCS 7733 60-Degree Woodworking Edge Banding Tongue and Groove Set, 1/2-Inch Shank, 2-Piece Review

MLCS 7733 60-Degree Woodworking Edge Banding Tongue and Groove Set, 1/2-Inch Shank, 2-Piece Feature

• Top quality, 2-flute, carbide-tipped matched 2 bit set
• Hide the Ply!
• Add an attractive and durable edge to cabinet doors and shelf edges
• Perfect for plywood and MDF panels.
• 1/2-Inch shank. For router table use

Add an attractive and durable edge to your cabinet doors and shelf edges. For use with plywood panels, MDF panels or shelves from 1/2" to 1" thick. All matched 2 piece bit sets are two-flute, carbide-tipped. Simply center the male cutter on the stock and make the cut. Next match up the female cutter with the center point of the first cut. Finish by gluing together the two pieces and flush trim the edges, if necessary. 60 deg. bits feature a tongue & groove for a larger glue surface area and easier alignment of edge banding. 1-7/16" Large Diameter. 1" Carbide Height. Recommended for use in a table mounted router.

Freud 40-114 45 Degree Chamfer Bit with 1/2-Inch Shank

Freud 40-114 45 Degree Chamfer Bit with 1/2-Inch Shank Review

Freud 40-114 45 Degree Chamfer Bit with 1/2-Inch Shank Feature

• 5/8-inch carbide, 45-degree angle, 1/2-inch shank
• Ground carbide with titanium for long life
• Anti-kickback
• Computer balanced for vibration free operation speeds over 22,000 RPM
• Impervious to chemical attack

An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Create a uniform chamfer on the edge of any work piece to add character while retaining crisp geometric lines. Chamfer size easily adjusts by changing the height of the bit. This router bit cuts all composite materials, plywood, hardwood, and softwood. Use on hand-held and table-mounted portable routers.

Freud 75-100 1/8-Inch x 1/2-Inch Up Spiral Router Bit 1/4-Inch Shank

Freud 75-100 1/8-Inch x 1/2-Inch Up Spiral Router Bit 1/4-Inch Shank Review

Freud 75-100 1/8-Inch x 1/2-Inch Up Spiral Router Bit 1/4-Inch Shank Feature

• Freud micrograin carbide for long life
• Anti-kickback design for safety
• Shear angle design produces superior finish
• Multi-axis grinding for burn free cuts
• Perma-shield coating to resist heat

1/8"diameter Up Spiral Router Bit 1/2"carbide cut height 1/4"shank solid carbide. For cutting mortises,grooves, dadoes and routing deep blind holes with effective chip removal.